Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Carburettor on a Piaggio Liberty

Model: (Various brands) Various
Part: Engine

If you need to replace the carburettor on this scooter model, you will find the information and steps to follow in the description below, and you can also refer to the images in the video. First, remove the battery, then take off the rear cover above the headlamp. Next, unscrew the fixing screws of the underseat panel, which will give you access to the carburettor. You can then remove it by unscrewing the fixing screws after disconnecting the fuel line. Proceed to clean or replace it as necessary.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli
How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli
(Various brands) Various Below are the instructions to remove and replace the carburettor of the Piaggio Si, as well as the Ciao and Garelli. First, place the central stand a…
How to Replace the Battery on a Piaggio Liberty 150
How to Replace the Battery on a Piaggio Liberty 150
(Various brands) Various This video illustrates how to replace the battery on a Piaggio Liberty 150. First, ensure the motorcycle is turned off and open the seat compartment.…
How to Replace the Clock Battery on Piaggio Liberty 125
How to Replace the Clock Battery on Piaggio Liberty 125
(Various brands) Various In this video tutorial, you will see how to replace the clock battery on the Piaggio Liberty 125 4-stroke by following a few simple steps that will h…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos