Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli

Model: (Various brands) Various
Part: Carburetor

Video tutorial

Below are the instructions to remove and replace the carburettor of the Piaggio Si, as well as the Ciao and Garelli. First, place the central stand and disconnect the throttle cable; then, unscrew the metal clamp screw of the air filter box, removing it from the carburettor, as shown in the video.

At this point, unscrew the screws of the carburettor intake manifold, disconnecting the fuel pipe to remove it; clean it or replace it with a new one, applying the reverse procedure!


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to disassemble the transmission pulley of the Piaggio SI
How to disassemble the transmission pulley of the Piaggio SI
(Various brands) Various .. pulley of the Piaggio SI, but also of the Ciao and Garelli. First of all, we put the central stand and start removing the side cover of the transmission;.. …
How to Remove the Carburettor from a Minarelli 50 Engine
How to Remove the Carburettor from a Minarelli 50 Engine
(Various brands) Various In this video, you can see how to remove a 21 PHPG carburettor from a 50cc Minarelli engine. First, place the scooter on a stand for safe working. If…
How do you disassemble the Garelli Mosquito 38 B engine?
How do you disassemble the Garelli Mosquito 38 B engine?
(Various brands) Various .. In order to disassemble the Garelli Mosquito 38 B engine, you need to loosen the screws that fix the cylinder to the top of the.. …

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos