Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carburettor from a Minarelli 50 Engine

Model: (Various brands) Various
Part: Carburetor

Video tutorial

In this video, you can see how to remove a 21 PHPG carburettor from a 50cc Minarelli engine. First, place the scooter on a stand for safe working.

If you have an open filter, you need to loosen it; to do this, find a screw at the inlet; then insert the screwdriver and unscrew the screw until the filter comes out of its seat. Now you will have the filter and carburettor; next, you need to loosen it from the reed valve.

To unscrew it, insert the screwdriver from behind, then pull it. At this point, you will see the pipes attached. To remove the clip from the pipe, hold the carburettor steady and use pliers to detach it and remove the pipe.

If you have a broken depressor, be careful as it will empty the petrol tank. Now the carburettor is only attached to the throttle cable.

Now that the carburettor is free, unscrew all the screws (for the air and float chamber, etc.). At this point, you can work on the internal components.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli
How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli
(Various brands) Various Below are the instructions to remove and replace the carburettor of the Piaggio Si, as well as the Ciao and Garelli. First, place the central stand a…
Cleaning and Repairing the Carburettor of a Stihl Chainsaw
Cleaning and Repairing the Carburettor of a Stihl Chainsaw
(Various brands) Various Chainsaws also have an engine and a carburettor that can malfunction. In this video, we will see how to repair it. After checking that the spark plug…
Replacing the Diaphragm Kit and Cleaning the Carburettor on a Husqvarna 135 Chainsaw
Replacing the Diaphragm Kit and Cleaning the Carburettor on a Husqvarna 135 Chainsaw
(Various brands) Various Let's see how to replace the diaphragm kit and clean the carburettor on a Husqvarna 135 chainsaw: turn off the chainsaw and disconnect the spark plug…

How to Adjust the Suspension on a TM Racing 300?

To adjust the suspension on a TM Racing 300, locate the rear shock absorber of the bike: this will be found inside the vehicle, in the area between the rear mudguard and the rear swingarm. Once the shock absorber is located, adjust it by tightening or loosening the bolts found at its lower and upper parts: following the instructions in the manual, you can perform the suspension adjustment and thus adjust the height of the bike according to your riding needs.

Watch the video!


by ScegliAuto

More videos