Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the Garelli Mosquito 38 B engine?

Model: (Various brands) Various
Part: Engine

Video tutorial

In order to disassemble the Garelli Mosquito 38 B engine, you need to loosen the screws that fix the cylinder to the top of the engine block: once the screws have been loosened, you can proceed by disconnecting the cylinder and locating the piston inside.

The piston can be freed from the connecting rod by expanding the corresponding ring and removing the appropriate pin: this way, you can disconnect the connecting rod from the engine shaft so that you can access the other internal components.

By replacing the necessary parts, you can reassemble the engine and verify that it works.


Posted on 31 July 2025 by ScegliAuto


Related tutorials

How to Dismantle the Garelli SSXL Engine
How to Dismantle the Garelli SSXL Engine
(Various brands) Various To dismantle the Garelli SSXL engine, you need to loosen the screws that secure the block to its housing, located in the central part of the frame: o…
How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli
How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli
(Various brands) Various Below are the instructions to remove and replace the carburettor of the Piaggio Si, as well as the Ciao and Garelli. First, place the central stand a…
How to Remove the Fuel Pump from the Tank
How to Remove the Fuel Pump from the Tank
(Various brands) Various How do you remove the fuel pump from the tank? Let's see how to take out the pump and replace it. Disconnect the battery cables, then remove the rear…

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos