Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Fabric Seat in Your Car

Model: (Various brands) Various
Part: Seat

Using the technique explained below, you will achieve the result shown in the attached video, perfectly repairing the fabric seat of your car. Insert some wadding into the hole, then cut a small piece of sponge, as close as possible to the size of the damaged area, apply some liquid glue and attach it. The final part of the intervention involves covering the surrounding areas of the damage with masking tape and applying spray paint, not just one coat but several, allowing each to dry in between.

Posted on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to repair the hole in the car seat with the ATG kit
How to repair the hole in the car seat with the ATG kit
(Various brands) Various Today we will explain how to repair a hole in the seat using the ATG kit. The kit is available in various colors and can be purchased online. We remo…
How to remove excess fabric from the car seat
How to remove excess fabric from the car seat
(Various brands) Various After a few years, the seats of our car start to show some excess fabric due to continuous rubbing on the seat from bags, suitcases, shopping bags, p…
How to repair a cigarette burn on a car seat
How to repair a cigarette burn on a car seat
(Various brands) Various In this video we can see how to repair a cigarette burn on a car seat. First, we need to remove the burn marks from the fabric, in order to reach the…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos