Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change Time on Iveco Daily 2020

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Onboard computer

Video tutorial
Detailed instructions - To change the time (and date), access the vehicle and close the door. Insert the key and turn on the ignition without starting the engine. At the bottom of the dashboard, under the right side of the steering wheel, identify the "MODE" button and press it repeatedly until you reach the option: "date and time". Adjust the time using the "up" and "down" arrow buttons. To save the new time setting, press the "MODE" button. Repeat the same procedure to adjust the minutes, again using the "up" and "down" arrow buttons and saving the new setting with the "MODE" button.

Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Change the Time on the Tachograph
How to Change the Time on the Tachograph
IVECO Daily (2006-2020 / MK 4) In this video, see how to change the time on the tachograph of an Iveco Daily when switching from British Summer Time to Greenwich Mean Time. You nee…
How to Change the Time on the Iveco Daily
How to Change the Time on the Iveco Daily
IVECO Daily Below are the main steps to adjust the time on the Iveco Daily. First, get inside the vehicle and turn on the ignition by turning the key to position…
How to Set the Date and Time on the Iveco Daily
How to Set the Date and Time on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) Today, we will see in this video tutorial how to change the date and time on the Iveco Daily. First, get into the vehicle and turn on the instrument …

Other guides you may be interested in

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos