Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair a Broken or Scratched Bumper

Model: (Various brands) Various
Part: Front bumper

Video tutorial

Let's see how to repair a broken bumper. The operation is done with a very flexible black plastic filler.

First, shape the piece with a heat gun. Work on one piece at a time, ensuring the pieces fit together without protruding. Work from the reverse side.

Sand it down well, then apply metal points with a stapler, which you can find on Amazon for £48 (including shipping), then place a plastic mesh - which can also be a flyscreen - and a two-component resin costing £15, also on Amazon. As our YouTuber suggests, it's worth doing this job because bumpers are expensive.

This serves as a base for the filler. Now, from the front side, level it with coarse grit.

Apply the filler following the YouTuber's instructions. When dry, use 80-grit sandpaper to restore the original line.

The plastic filler can be found on Amazon, called IVAT KFS, costing £12. After sanding, if there are small imperfections, you can apply metal filler (but they must be small). Then use 80-grit first, followed by 120-grit for a smooth finish.

Then use 240, 320, and 400 with a drill. Finish with 600 by hand and then apply a primer.

It's best to use a black primer. Allow it to dry thoroughly, then repaint.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to restore a scratched motorcycle screen
How to restore a scratched motorcycle screen
(Various brands) Various In this video, we see how to restore a scratched motorcycle screen: this is something you should only do if it is scratched on a corner. If it is scr…
How to Repair Your Car's Bumper Independently
How to Repair Your Car's Bumper Independently
(Various brands) Various Repairing the rear bumper of a car independently is possible and easy with our video tutorial and guide. Start by removing the bumper; first, open th…
How to repair the gear linkage
How to repair the gear linkage
(Various brands) Various In this video, you will see how to repair a gear linkage that has become loose or broken. In this case, it is likely that the collar holding the two …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos