Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Piaggio Vespa

Model: (Various brands) Various
Part: Clock

If you need to set the clock on this motorcycle, follow the simple instructions below: the time display is located at the bottom centre of the dashboard. Next to the right knob is the Mode button; press and hold the Mode button, and the time display will start to flash. Press this button again to advance the hour. Press the same button again and hold it to save the new time. After that, by pressing this button, you can modify the minutes and finally hold it to save the new value.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Piaggio Vespa
How to Set the Clock on the Piaggio Vespa
(Various brands) Various If you need to change the time on your scooter, refer to the instructions in this video tutorial and the instructions provided below. On the scooter'…
How to Set the Time on the Piaggio Vespa
How to Set the Time on the Piaggio Vespa
(Various brands) Various If you need to set the time on this model of motorcycle, the following description provides the procedure and various simple operations to update the…
How to adjust the clock on the Vespa Gts 300
How to adjust the clock on the Vespa Gts 300
(Various brands) Various To adjust the clock on the scooter, follow these simple steps: insert the key and turn on the ignition. At the bottom of the dashboard, you will see …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos