Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Piaggio Liberty

Model: (Various brands) Various
Part: Clock

In this video, you can see how to change the time on a Piaggio Liberty scooter by following simple steps for correct time adjustment: the button to adjust the clock is located on the right side of the handlebars under the throttle grip and is called (MODE). You must press and hold the MODE button. If the button feels stiff, you need to unlock it by pressing it several times, as it may be stuck. Hold the MODE button for a few seconds until the HOURS start to flash; at this point, press lightly until you set the desired hour. To adjust the minutes, hold the MODE button and press lightly when the minutes are flashing to set the minutes as well. At this point, just hold the MODE button, and you will have set the time: (CLOCK RESET COMPLETED).

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on the Piaggio Liberty 125
How to Replace the Spark Plug on the Piaggio Liberty 125
(Various brands) Various In this video, you will learn how to replace the spark plug on the Piaggio Liberty 125. Open the seat and then remove the storage bucket underneath. …
How to Replace the Battery on a Piaggio Liberty 150
How to Replace the Battery on a Piaggio Liberty 150
(Various brands) Various This video illustrates how to replace the battery on a Piaggio Liberty 150. First, ensure the motorcycle is turned off and open the seat compartment.…
How to Remove the Plastics from the Piaggio Liberty
How to Remove the Plastics from the Piaggio Liberty
(Various brands) Various Today, with the help of this video tutorial, we will explain how to replace the body parts of the Piaggio Liberty 125 scooter. Start by unscrewing th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos