Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on the Piaggio Liberty 125

Model: (Various brands) Various

Video tutorial

In this video, you will learn how to replace the spark plug on the Piaggio Liberty 125. Open the seat and then remove the storage bucket underneath. Locate the spark plug and disconnect the cap as shown in the video.

Use the socket spanner and screwdriver provided and turn anti-clockwise to unscrew the spark plug. Once loosened, continue unscrewing it with your fingers and remove it from its housing.

Now insert the new spark plug and screw it in first with your fingers and then with the tools provided. At this point, reconnect the cap for the electrical contact and you are finished.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Replace the Footboard on the Piaggio Liberty 125 Scooter
How to Replace the Footboard on the Piaggio Liberty 125 Scooter
(Various brands) Various This video shows how to replace the footboard on the Piaggio Liberty 125 scooter. The first part to remove is the seat, then the under-seat panel, an…
How to Change the Spark Plug on the Piaggio Liberty 50
How to Change the Spark Plug on the Piaggio Liberty 50
(Various brands) Various If you want to proceed with replacing the spark plug on your scooter, you will find the instructions very simple as described below, and you can refe…
How to Replace the Clock Battery on Piaggio Liberty 125
How to Replace the Clock Battery on Piaggio Liberty 125
(Various brands) Various In this video tutorial, you will see how to replace the clock battery on the Piaggio Liberty 125 4-stroke by following a few simple steps that will h…

    Frequently Asked Questions

    • Vari - Triangle Season X TA01 tyres: characteristics and opinions Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos