Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Spark Plug on the Piaggio Liberty 50

Model: (Various brands) Various
Part: Spark plugs

If you want to proceed with replacing the spark plug on your scooter, you will find the instructions very simple as described below, and you can refer to images from the video. After placing the scooter on its stand, open the panel located in front of the footrest. Underneath, you will find the spark plug. Proceed to remove the cap first, then use a suitable spanner to unscrew the spark plug itself, position the new spark plug, and screw it back in. Reattach the cap and finally close the plastic panel, and the job will be complete.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on the Piaggio Liberty 125
How to Replace the Spark Plug on the Piaggio Liberty 125
(Various brands) Various In this video, you will learn how to replace the spark plug on the Piaggio Liberty 125. Open the seat and then remove the storage bucket underneath. …
How to Set the Time on a Piaggio Liberty
How to Set the Time on a Piaggio Liberty
(Various brands) Various In this video, you can see how to change the time on a Piaggio Liberty scooter by following simple steps for correct time adjustment: the button to a…
How to Replace the Footboard on the Piaggio Liberty 125 Scooter
How to Replace the Footboard on the Piaggio Liberty 125 Scooter
(Various brands) Various This video shows how to replace the footboard on the Piaggio Liberty 125 scooter. The first part to remove is the seat, then the under-seat panel, an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos