Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to replace the air filter on Suzuki Burgman 650

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Air filter
Operation: How to replace the air filter on Suzuki Burgman 650

In this video we can see how to replace the air filter on Suzuki Burgman 650. The first thing to do is place the scooter on a flat and rigid work surface with the stand inserted. Then you have to open the glove box located under the handlebar of the scooter. Once the drawer is open, you must also remove the lid located next to it. Inside we find cables and plugs; now you need to take a cross screwdriver and remove the four screws you see; once the screws have been removed, you have to remove the internal plastic; behind this plastic that you removed is the air filter. Remove the air filter and replace it with a new one of the same model. Reassemble all the parts by proceeding in reverse order.


Posted on 11 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - Where is the cabin air filter located? Read Answer
    • Vari - Where is the Yamaha T-Max 500 air filter located? Read Answer
    • Vari - Where is the Yamaha Tmax air filter located? Read Answer
    • Vari - How much is the air filter on the Keeway Cafe Racer 152? Read Answer
    • Vari - How do i replace the air filter on my moto Guzzi v65 c? Read Answer
    • Vari - Volkswagen how many filters to change at the coupon? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos