Do it yourself
Frequently asked questions about cars and motorcycles

Three Types of Problems That May Occur with the Brake Pedal

Model: (Various brands) Various
Part: Checks and maintenance

Three types of problems may occur with the brake pedal: the first is that the pedal suddenly becomes very hard; in this case, the fault lies with the brake booster, as the pipes or vacuum pump may have broken and the diaphragm is no longer functioning. The result is that the brake pedal feels like a wall, even though the vehicle still brakes. Another problem is that the pedal no longer holds and goes to the end of its travel. In this case, the brake pump may be faulty, or there could be a leak from the flexible hoses. The first check is to see if there is a leak (which is very dangerous). The last possible problem: when braking, the pedal feels long, the brakes are soft, and the pedal returns up. This means that an air bubble has formed in the system; therefore, it is necessary to bleed the braking system, including the ABS.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various The video illustrates some very common causes: the first is the exhaust system in general. So the lambda probe or faulty oxygen sensor, the inefficie…
(Various brands) Various The arrangement of the pedals in a vehicle with a manual transmission always follows the same pattern: clutch pedal, brake pedal, and accelerator ped…
(Various brands) Various To reset the DSG gearbox, we need to get on board the vehicle and insert the key into the ignition switch to turn on the instrument panel. Start the …

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos