Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
As shown in the video, if you are interested in a DIY repair of the handle on a 2008 Buick Lucerne, you will need to remove the entire interior door panel connected to that handle. First, you will need to unscrew the only screw connected to the handle. Then, using a lever or pry bar with some tape or adhesive tape to avoid damaging the paint, you will need to release all the latches or pins that hold the door in place as shown in the video. Once the outer panel is removed, you will have access to the inner panel where you will need to remove two bolts that hold the handle in place. Once removed, you can detach the handle and make the necessary repairs.
Posted on 31 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the AdBlue tank on Peugeot 3008In order to replace the AdBlue tank on the car it is necessary to know that it is located above the diesel tank and therefore under the rear trunk floor and to access it it is necessary: first of all lift the car on the deck, then remove the lower metal protective casing of the tank and under it we will find the diesel tank. Then proceed to disassemble the tank with the help of a forklift to support it. Once the diesel tank has been freed and lowered, above it we will find the small AdBlue tank. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |