Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Car Headlamp

Model: (Various brands) Various
Part: Headlight

In this video, see how to remove the lens from a headlamp; you will need a hairdryer and some screwdrivers. Ensure you have already removed the headlamp from your vehicle (one of our tutorials will help with this), remove the metal clips, and heat the headlamp to soften the silicone. Use a craft knife to assist in separating the transparent part from the base. Start prying while continuing to heat, and insert another screwdriver. As the silicone warms, keep inserting more screwdrivers until the headlamp opens completely. Now the headlamp is open, and you can perform all necessary operations.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of a vehicle
How to replace the headlight bulb of a vehicle
(Various brands) Various It doesn't matter if your car is a Citroen, a Peugeot, a Jeep, or an Opel, replacing the headlight bulb of any car usually follows almost the same st…
How to Solve the Condensation Problem Inside the Car Headlight
How to Solve the Condensation Problem Inside the Car Headlight
(Various brands) Various In this video tutorial, you can see how to solve the condensation problem inside your car's headlight. When this problem occurs, the likely cause is …
How to Adjust Car Headlights?
How to Adjust Car Headlights?
(Various brands) Various Correctly adjusting the front headlights of the car is extremely important both to avoid dazzling drivers coming from the opposite direction and to e…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos