Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In order to calibrate the injectors of the Volkswagen 1.6 TDi engine, it is necessary to use a scanner with VCDS program. This scanner should be connected to the OBD port of the vehicle, located on the lower left side of the dashboard, next to the steering column. This way, it will be possible to select the car model and corresponding version, to read real-time values provided by the control unit. At this point, a 16-key can be used to adjust the piezo of each injector, so that the values fall within those recommended in the tutorial.
Posted on 26 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.120
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |