Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this tutorial, we can see how to reset the ECU in the Toyota Vios, a very simple operation to be carried out, for example, as an attempt to resolve an electronic malfunction. First of all, open the hood, then disconnect the negative terminal of the battery, wait about 5 minutes, and reconnect it. Then go inside the cabin, turn on the instrument panel, wait 2 minutes, and, while holding down the accelerator pedal, turn off the panel. Wait another 60 seconds with the pedal still in position, release it, and check that the operation was successful by starting the engine.
Posted on 28 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.083
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |