Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this video, we see how to perform proxy alignment on Fiat systems, which is not exactly intuitive. We start with "intelligent diagnosis" by reading the VIN and consequently decoding the VIN itself and identifying the model. We go into the system selection, then into the ECM command module (apparently on this vehicle, the engine control module is where the proxy alignment has been inserted). From here, we go into the specific functions and select the "proxy alignment procedure" option. As indicated, it is necessary to have the engine off but the key in the ON position: we will hear the air conditioner relay activate. Once the procedure is complete, we turn the key to the OFF position. Following the instructions, we turn the key back to the ON position; procedure completed.
Posted on 8 December 2023 by ScegliAuto
What is the proxy alignment procedure
(Various brands) Various When some warning lights come on or there is some problem with a control unit, you immediately hear about the CAN BUS line (Controller Area Network):
How is the Proxy alignment procedure performed?
(Various brands) Various In this example, the procedure described above is carried out on a Fiat Panda. Remember that it is necessary when there is a modification of electron
How to adjust the car headlights
(Various brands) Various Adjusting the front headlights is an operation that requires the intervention of a qualified operator and a special tool called the headlight adjuste Other guides that may interest you
|
Frequently Asked QuestionsHow do I replace the Land Rover Evoque auxiliary battery?In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.043
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |