Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Rubber Mount of a Car?

Model: (Various brands) Various
Part: Engine

Video tutorial

The task at hand, shown in the video, is performed on a Fiat Panda, but generally, the execution methods are similar across various vehicles. Specifically, this concerns the rubber mount on the right side of the engine, near the timing belt, where wear can be checked using a lever.

Remove the undertray, disconnect the hoses from the coolant reservoir, and move the reservoir sideways. Proceed to remove the intake manifold, position a jack to support the engine, and finally, detach the aforementioned rubber mount.

Reverse the procedure to reassemble everything.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

Removing Universal Car Antenna
Removing Universal Car Antenna
(Various brands) Various Remove the universal antenna from your car. Take off the interior light or the trim panel at the rear of the car (depending on whether the antenna is…
…
…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos