Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Five Useful Tips for New Drivers

Model: (Various brands) Various

Here is a list of five useful tips to follow if you are a new driver. The first tip: check the vehicle's condition before setting off. Perform a vehicle check and inspect the parking area for any oil or fluid leaks to avoid sudden starts and incidents such as breaking down on the motorway. The second tip: pay attention to any noises. If you prefer to drive while listening to music, lower the volume to hear the sounds of your vehicle, allowing you to identify if something is wrong. The third tip: be mindful of your seatbelt. Although almost all modern cars have devices that alert the driver with an audible signal to remember to fasten the seatbelt, it can happen that the driver overlooks it. Always remember to wear it as it will protect you in case of an accident. The fourth tip: use all the functions of the rear-view mirror when manoeuvring. The fifth tip: prevent the car windows from misting up.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting Parking Sensors in a Car
Fitting Parking Sensors in a Car
(Various brands) Various In this video, you will see some tips on how to fit parking sensors in any car. First, obtain the new parking sensors for your vehicle; then measure …
When to Replace the Car Timing Belt
When to Replace the Car Timing Belt
(Various brands) Various In this video, follow practical advice on what to do and when to change the timing belt of your car. The timing belt is a crucial component that tran…
How to prevent rust on your car
How to prevent rust on your car
(Various brands) Various Today, here are the five best tips to prevent rust on your car. The first tip is to clean the body drainage holes. All vehicles have water drainage c…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos