Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to prevent rust on the car

Model: (Various brands) Various
Part: Checks and maintenance

Today we want to give you the five best tips to prevent rust on your car. The first tip is to clean the body drain holes. All vehicles have water drainage channels that, due to dirt accumulation during car operation, cause the car to retain moisture which will eventually lead to rust. The second tip is to regularly wash the vehicle using the right products and drying it well. The third tip is to remove any chipping. If you notice any chipping, use a degreaser to remove it. The fourth tip is to avoid parking the car in open and humid places. The fifth tip is to have an anti-corrosion treatment done on the entire vehicle.

Posted on 14 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Clean a Rusty Fuel Tank
How to Clean a Rusty Fuel Tank
(Various brands) Various If you are approaching the restoration of a classic vehicle, you will need to tackle one of the most delicate steps, which is the removal of rust ins…
A Way to Remove Rust from the Bodywork
A Way to Remove Rust from the Bodywork
(Various brands) Various If the bodywork of your vehicle has suffered a small impact that has removed the paint layer, this will expose the metal sheet to rust. If you do not…
How to Remove Rust and Paint a Wheel Rim?
How to Remove Rust and Paint a Wheel Rim?
(Various brands) Various If you want a refined and clean appearance for your car, you must also take care of the wheel rims as they can be damaged by water, impacts, and wear…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos