Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Starter Motor Yourself

Model: (Various brands) Various
Part: Starter motor

In this video, see how to attempt to repair the starter motor of your vehicle. Once located and removed (you will find the relevant tutorial among our resources), clean and disassemble it, removing the long screws that hold the mechanical part. Remove the cover and take out the spring; it may not be easy to decide to disassemble it completely, but it can be useful to learn how it is constructed and gain experience for future repairs. Now, carry out a thorough cleaning of all parts, first with a brush and then with WD-40 or specific foam cleaners like the B07CP15P45 code on Amazon, which costs £11.70 per can, with free delivery for Prime customers. You may decide to repaint it, and to do this, prepare the masking, apply a paint stripper, scrape off the old paint well, and then proceed with spray painting, using primer followed by your chosen colour. Now, proceed with reassembly, refitting the springs and all various components properly lubricated; tighten all screws, and finally, your starter motor, as good as new, can be reinstalled in its place in the engine bay of your vehicle.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor
Replacing the Starter Motor
(Various brands) Various Want to replace the starter motor in your car? Here’s how to remove the damaged part from the engine bay. Lift the front bonnet to access the starter…
Removing the Car Starter Motor
Removing the Car Starter Motor
(Various brands) Various Is the starter motor on your car showing no signs of operation? Here's how to remove it from the engine bay. Disconnect the starter motor power termi…
How to connect the alternator
How to connect the alternator
(Various brands) Various In this video we can see how to connect the starter motor and the alternator to the battery and then to the ignition switch. If you have knowledge of…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos