Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Lupo
    4. : Windshield wipers

Volkswagen Lupo - Windshield wipers

Windshield Wipers Volkswagen Lupo (1998-2005 / mk 1)

Volkswagen Lupo (1998-2005 / MK 1)
What are the fuses for the windshield wipers in the Volkswagen Lupo?
If the windshield wipers of our Volkswagen Lupo have suddenly stopped working, we can first check the status of the relevant fuses, the location of which is …Read all…
Posted on 11 January 2026 by ScegliAuto
Volkswagen Lupo (1998-2005 / MK 1)
How to Change the Front Windscreen Wiper Blade on a Volkswagen Lupo?
Changing the wiper blade on the Volkswagen Lupo is a straightforward task that requires no special tools. Start by lifting the wiper arm and then detach the …Read all…
Posted on 19 July 2026 by ScegliAuto
Volkswagen Lupo (1998-2005 / MK 1)
How to Replace Wiper Blades on a Lupo
Replace the damaged wiper blades on a Volkswagen Lupo. Take the front wiper blade (to be replaced) with your hands, pull the movable blade as shown in the …Read all…
Posted on 28 April 2026 by ScegliAuto
Alternator (1) Car stereo (1) Battery (2) Control arm (1) Transmission (1) Spark plugs (1) Timing belt (4) Checks and maintenance (1) Air filter (1) Cabin air filter (1) Fuel filter (1) Parking brake (1) Headlight bulb (2) Handle (2) Power window motor (1) Starter motor (1) Transmission fluid (1) Clock (7) Door trim panel (4) Brake pads (1) Fuse box (14) Seat (1) Crankshaft position sensor (1) Door lock (1) Side mirror (2) Service warning light (5) Windshield wipers (3) EGR valve (2) Steering wheel (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos