Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Lupo
    4. : Steering wheel

Volkswagen Lupo - Steering wheel

Volkswagen Lupo (1998-2005 / MK 1)
How to remove the steering wheel airbag on the Volkswagen Lupo.
If we want to proceed with disassembling and replacing the steering wheel airbag on this car model, in the description below we will find all the instructions …read all…
Posted on 31 May 2023 by ScegliAuto
Volkswagen Lupo (1998-2005 / MK 1)
How to remove the steering wheel of the Volkswagen Lupo.
If we want to remove the steering wheel of the Volkswagen Lupo, it is a rather simple operation. The first thing to do is to rotate the steering wheel so that, …read all…
Posted on 22 November 2023 by ScegliAuto
Volkswagen Lupo (1998-2005 / MK 1)
How to remove the steering wheel with airbag on Volkswagen Lupo
How to remove the steering wheel with airbag on Volkswagen Lupo? Very simple operation if you follow the various steps, we see in this guide how to proceed: …read all…
Posted on 18 October 2023 by ScegliAuto
Alternator (1) Car stereo (1) Battery (1) Arm (1) Spark plugs (1) Timing belt (4) -board computer (1) Checks and maintenance (5) Air filter (1) Cabin air filter (1) Petrol filter (1) Hand brake (1) Headlight bulb (2) Handle (2) Starter motor (1) Gear oil (1) Door panel (4) Brake pads (1) Instrument cluster (1) Fuse box (8) Seat (1) Crankshaft RPM sensor (1) Lock (1) Outside rearview mirror (1) Windscreen wipers (2) EGR valve (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos