Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Lupo - Handle

Handle Volkswagen Lupo (1998-2005 / mk 1)

Volkswagen Lupo (1998-2005 / MK 1)
How to Replace the Rear Tailgate Handle on the Volkswagen Lupo
This guide provides the main instructions for removing and replacing the rear tailgate handle of the Volkswagen Lupo, as well as the Golf. First, open the rear …Read all…
Posted on 2 August 2026 by ScegliAuto
Volkswagen Lupo (1998-2005 / MK 1)
How to Replace the Internal Handle on a Volkswagen Lupo?
To replace the internal handle on a Volkswagen Lupo, you need to detach the cover from the top of the armrest to access the screws underneath. Once these …Read all…
Posted on 16 August 2026 by ScegliAuto
Alternator (1) Car stereo (1) Battery (2) Control arm (1) Transmission (1) Spark plugs (1) Timing belt (4) Checks and maintenance (1) Air filter (1) Cabin air filter (1) Fuel filter (1) Parking brake (1) Headlight bulb (2) Handle (2) Power window motor (1) Starter motor (1) Transmission fluid (1) Clock (7) Door trim panel (4) Brake pads (1) Fuse box (14) Seat (1) Crankshaft position sensor (1) Door lock (1) Side mirror (2) Service warning light (5) Windshield wipers (3) EGR valve (2) Steering wheel (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos