Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Lupo
  6. : EGR valve

Volkswagen Lupo - EGR valve

EGR Valve Volkswagen Lupo (1998-2005 / mk 1)

Volkswagen Lupo (1998-2005 / MK 1)
How to Replace the EGR Valve on a Volkswagen Lupo

To replace the EGR valve on a Volkswagen Lupo, open the bonnet and locate the valve near the intake manifold, connected to the exhaust gas ducts. Before …Read all…
Posted on 19 May 2026 by ScegliAuto
Volkswagen Lupo (1998-2005 / MK 1)
Instructions for Replacing the EGR Valve

The EGR valve functions to introduce some exhaust gases into the intake to reduce emissions: constant contact with exhaust gases leads to clogging over time …Read all…
Posted on 24 February 2026 by ScegliAuto

Alternator (1) Car stereo (1) Battery (2) Control arm (1) Transmission (1) Spark plugs (1) Timing belt (4) Checks and maintenance (1) Air filter (1) Cabin air filter (1) Fuel filter (1) Parking brake (1) Headlight bulb (2) Handle (2) Power window motor (1) Starter motor (1) Transmission fluid (1) Clock (7) Door trim panel (4) Brake pads (1) Fuse box (14) Seat (1) Crankshaft position sensor (1) Door lock (1) Side mirror (2) Service warning light (5) Windshield wipers (3) EGR valve (2) Steering wheel (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos