Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Tailgate Handle on the Volkswagen Lupo

Model: Volkswagen Lupo MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Handle

This video is currently unavailable

This guide provides the main instructions for removing and replacing the rear tailgate handle of the Volkswagen Lupo, as well as the Golf. First, open the rear tailgate and start removing the plastic inner panel or trim. Then, unscrew the fixing screws of the handle, disconnecting the lock cable to remove it, as shown in the video.

At this point, install the new handle, fitting the lock cylinder; connect it and finally reassemble the rear tailgate panel!


Updated on 2 August 2026 by ScegliAuto


Related tutorials

Volkswagen Lupo (1998-2005 / MK 1) Before you can start, open the tailgate of the boot of your Volkswagen Polo. Begin by unscrewing and removing the screws that secure the tailgate pan…
Volkswagen Lupo (1998-2005 / MK 1) To replace the internal handle on a Volkswagen Lupo, you need to detach the cover from the top of the armrest to access the screws underneath. Once t…
Volkswagen Lupo (1998-2005 / MK 1) Follow these instructions to remove and replace the door panel of the Volkswagen Lupo. First, open the front door of your car and start by removing t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos