Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Scirocco
  6. : Checks and maintenance

Volkswagen Scirocco - Checks and maintenance

Checks And Maintenance Volkswagen Scirocco (2008-2017 / mk 3)

Volkswagen Scirocco (2008-2017 / MK 3)
Where is the OBD2 Port on the Volkswagen Scirocco?

If you do not know where the OBD2 port is located on your Volkswagen Scirocco, do not worry as you just need to read this guide carefully to find it easily. …Read all…
Posted on 13 May 2026 by ScegliAuto
Volkswagen Scirocco (2008-2017 / MK 3)
How to reset the partial kilometers of the Volkswagen Scirocco

The following steps will show us how to reset the partial kilometers of the Volkswagen Scirocco. First, we get into the car and turn on the instrument panel; …Read all…
Posted on 5 April 2025 by ScegliAuto
Volkswagen Scirocco (2008-2017 / MK 3)
How to Deactivate the AFS System on the Volkswagen Scirocco

Below are the necessary instructions to deactivate the AFS system or Cornering lights (curved beam) on the Volkswagen Scirocco. To deactivate this additional …Read all…
Posted on 18 September 2026 by ScegliAuto

Cigarette lighter (1) Airbag (1) Car stereo (2) Battery (1) Transmission (1) Body (1) Key (1) Timing belt (2) Air conditioner (1) Checks and maintenance (3) Dashboard (2) Headlight (1) Air filter (3) Accessory kit (1) Light bulb (1) Side marker bulb (1) Headlight bulb (1) Interior dome light bulb (5) License plate light (2) Clock (3) Door trim panel (2) Rear bumper (2) Pump (1) Push button (1) Radiator (1) Fuse box (6) Side mirror (1) Warning light – error code (4) (9) Tire pressure warning light (3) Service warning light (19) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos