Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Deactivate the AFS System on the Volkswagen Scirocco

Model: Volkswagen Scirocco MK 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

Video tutorial

Below are the necessary instructions to deactivate the AFS system or Cornering lights (curved beam) on the Volkswagen Scirocco. To deactivate this additional function of your vehicle, connect a suitable diagnostic software to the OBD port of the car; then select the make, model, and engine type, as shown in the video.

At this point, go to the activation and deactivation section and proceed to deactivate the AFS system for the Cornering lights, following the video tutorial to the end!


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to deactivate the passenger airbag in the Volkswagen Scirocco?
How to deactivate the passenger airbag in the Volkswagen Scirocco?
Volkswagen Scirocco (2008-2017 / MK 3) In this tutorial, see how to deactivate the passenger airbag in the Volkswagen Scirocco. This is a straightforward operation necessary for fitting a …
Where to Find the Fuse Box on a Volkswagen Scirocco
Where to Find the Fuse Box on a Volkswagen Scirocco
Volkswagen Scirocco (2008-2017 / MK 3) In this new mini guide dedicated to your Volkswagen Scirocco (2008-2017), we will discover where the fuse box is located. Once identified, you will f…
How to Reset the On-Board Computer on the Volkswagen Scirocco?
How to Reset the On-Board Computer on the Volkswagen Scirocco?
Volkswagen Scirocco (2008-2017 / MK 3) To reset the on-board computer on the Volkswagen Scirocco, turn on the instrument cluster by inserting the ignition key into the barrel. Once the clu…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos