Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the window seal of the Volkswagen Golf?

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Checks and maintenance

In order to replace the window seal of the Volkswagen Golf, you need to pry it off with an object like a screwdriver, so that the piece is detached from its housing: it will be enough to lift the seal from one end, so that it is gradually detached along its entire length. This operation will be the same for all the windows of the vehicle; once the old seal is removed, it will be possible to remove the part that protects the lower adhesive of the new seal, thus positioning and securing it in its seat.

Posted on 2 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1983-1992 / MK 2, Golf 2) To replace the window seal on a Volkswagen Golf, first remove the caps located at both ends of the seal along the glass. Once the caps are removed, u…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video, we will see how to fit window deflectors on a fifth-generation Volkswagen Golf; this procedure can be applied to most vehicles on the …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset the window regulators on a Volkswagen Golf, fully raise the selected window by pulling up the relevant button. Once the window is at its max…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos