Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the START&STOP system of the VW Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019

Disabling the START&STOP system of the Volkswagen Golf 7 is a very simple operation that must be carried out using a diagnostic computer connected to the car's OBD port. To disable the system, it is necessary to connect the PC or phone to the car and then start the instrument panel. Next, select the "Adaptation" option from the system and then immediately select the "START&STOP voltage limit and start" option to disable the system. If you are looking for a way to activate the system, you will need to follow the same procedure but select activate system. Once finished, you can disconnect the PC from the car.

Posted on 7 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This guide explains how to disable the automatic Start&Stop system on the Volkswagen Golf, Tiguan, and Passat using VCDS software. First, connect the…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) In this guide, you will discover the main instructions that will allow you to activate and deactivate the Start&Stop system in the Volkswagen Golf in…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this short guide, we will see the instructions on how to deactivate and activate the Start&Stop system of the Volkswagen Golf. First, let's get in…

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos