Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the START&STOP system of the VW Golf

Model: Volkswagen Golf Golf 8, MK 8, Golf Viii - Years 2019-2026
Part: Onboard computer

Disabling the START&STOP system is a very simple and quick operation to perform on the Volkswagen Golf model 8. To deactivate the system, we must first turn on the car's instrument panel and then select the voice related to the system from the on-board computer and press the off button to deactivate it. By doing so, we will have permanently deactivated the system, also thanks to the new update installed on the Volkswagen Golf. To activate the system, you will need to follow the same procedure but select the voice "START&STOP ACTIVE". In both cases, after making the selection, you will need to turn off and restart the instrument panel.

Posted on 24 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The instructions in this guide will show you how to disable and enable the Start&Stop system on the Volkswagen Golf. First, get into the vehicle and …
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) In this article, we will see how to deactivate the start and stop system of the Volkswagen Golf 8 in order to preserve the battery. The procedure is …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To disable the Start&Stop system on the Volkswagen Golf, you need to use a diagnostic tool, in this case, OBD 11, which can be controlled directly fr…

    Frequently Asked Questions

    • Golf 2019-2026 - Why does the Volkswagen Golf 8 front assist system not work? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos