Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the swing arm of the Volkswagen Polo 4

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Control arm

To replace the front control arm of the Volkswagen Polo, loosen the nuts of the front wheel and lift the car with the help of a bridge. Remove the nuts and take off the wheel, clean the fastening nuts and unscrew them starting with the fixing element and ending with the spherical joint. Using a pry bar, remove the old control arm, then clean the housing with a brush and spray cleaner and insert the new control arm using the pry bar. Insert new nuts and bolts, support the suspension with a hydraulic jack and finish tightening the nuts with a torque wrench. Put the wheel back on and lower the car.

Posted on 7 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wheel Silent Block of the Volkswagen Golf?
How to Replace the Front Wheel Silent Block of the Volkswagen Golf?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To replace the silent block of the Volkswagen Golf, first loosen the screws securing the wheel to the hub, completely removing it to access its compo…
Replacement of the Air Filter on the Volkswagen Polo
Replacement of the Air Filter on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Replacing the air filter that feeds the engine of the Volkswagen Polo is one of the operations included in the maintenance service. To do this, open …
Wishbone Replacement on Volkswagen Polo
Wishbone Replacement on Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Loosen the 17 mm bolts on the affected wheel, lift the car with a jack (if you do not have a ramp), and remove the wheel. Use a wire brush and WD40 t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos