Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of a Volkswagen Multivan

Model: Volkswagen Multivan T5, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

In this video, we will see how to proceed with removing the front bumper of a Volkswagen Multivan. Lift the bonnet and secure it. Using a battery-powered screwdriver or a screwdriver, unscrew the fastening nuts located at the top of the bumper.

Once the screws at the top are removed, unscrew the splash guard nuts and finally remove the nuts at the bottom of the bumper. Remove the bumper from the vehicle body by hand.

To proceed with the installation: position the bumper on the vehicle body by hand and tighten all the screws around the splash guard and around the perimeter.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Change the Headlight Bulb on a Volkswagen Multivan
How to Change the Headlight Bulb on a Volkswagen Multivan
Volkswagen Multivan (2003-2015 / T5, MK 2) The selected video shows how to change the headlight bulb on a Volkswagen Multivan T5. Open the bonnet and access the rear of the headlight unit. Rem…
Where Are the Fuses Located in the Volkswagen Multivan?
Where Are the Fuses Located in the Volkswagen Multivan?
Volkswagen Multivan (2003-2015 / T5, MK 2) The fuses of the Volkswagen Multivan are housed within three fuse boxes installed in the vehicle: two are located inside the cabin and one in the eng…
Where Are the Fuses Located on a Volkswagen Multivan?
Where Are the Fuses Located on a Volkswagen Multivan?
Volkswagen Multivan (2003-2015 / T5, MK 2) The three fuse boxes installed in the Volkswagen Multivan contain the fuses that control the operation of the devices installed in the vehicle. Two o…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos