|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Volkswagen Amarok?
Model: Volkswagen Amarok
MK 1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
To reset the "Service" light on a Volkswagen Amarok, turn on the instrument panel without starting the engine. Locate the button positioned under the instrument panel, usually located at the bottom of the dashboard. Press and hold the button while turning off and then turning on the instrument panel again. During this procedure, a message will appear on the display asking you to confirm the reset of the maintenance interval. At this point, release the button and, if necessary, press it again to finalize the process. The "Service" light should turn off, indicating that the reset has been successfully completed. Before performing this operation, make sure that the vehicle has had an oil change and a general check-up so that the system can properly monitor future maintenance intervals. If the light remains on or you encounter difficulties, consult the owner's manual or contact a specialized workshop for assistance.
Posted on 9 January 2025 by ScegliAuto
Related tutorials
Volkswagen Amarok
(2010-2021 /
MK 1)
In the Volkswagen Amarok, you can completely clear the Service light by holding down the 0.0/SET button located at the bottom centre of the instrumen…
Volkswagen Amarok
(2010-2021 /
MK 1)
You can completely clear the Service light on a Volkswagen Amarok by pressing and holding the 0.0/SET button located on the right side of the instrum…
Volkswagen Amarok
(2010-2021 /
MK 1)
To completely reset the Service light on the instrument cluster of the Volkswagen Amarok, press and hold the 0.0/SET button located at the bottom cen…
Other guides you may be interested in
|
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
