Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight of the Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the front headlight of the Volkswagen Golf. First of all, we open the hood of the car and start unscrewing all the fixing screws located on the top of the headlight and on both sides of the front fenders, thus releasing the bumper on the sides; then we unscrew the lower screw of the headlight and disconnect the electrical connector of the bulbs to remove it, as shown in the video.

At this point, we replace the bulbs or the entire headlight assembly, finally reassembling the side part of the bumper.


Posted on 23 January 2025 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the 2009 Volkswagen Golf
How to replace the rear headlight bulb of the 2009 Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the rear headlight bulb of the 2009 Volkswagen Golf, we need to open the trunk and unscrew the locking nuts located on the outside of the …
How to replace the rear headlight bulb of the Volkswagen Golf 7
How to replace the rear headlight bulb of the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The correct functioning of all the rear headlight bulbs of your Volkswagen Golf Mk7 is absolutely important not only for your safety, but also and ab…
How to Adjust the Height of the Headlights in the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Below are the instructions that will allow you to adjust the height of the headlights in the Volkswagen Golf. First, position yourself in front of a …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos