Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front speakers of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Speaker

See other generations:
Video tutorial

In today's video, we will see how to disassemble and replace the front speakers of the Volkswagen Golf. First, we open the front door and start disassembling and removing the door panel; to do this, we unscrew all the fixing screws located under the handle cover, then lever on the sides to remove it (disconnecting the electrical connector and the handle cable), as shown in the video.

At this point, we unscrew the speaker screws to remove it, also disconnecting the wiring; replace it with the new one and check its operation before reassembling everything!


Posted on 27 January 2025 by ScegliAuto


Related tutorials

Guide to Replacing the Front Speakers on the Volkswagen Golf
Guide to Replacing the Front Speakers on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) These simple steps will show you how to remove and replace the front speakers on the Volkswagen Golf. First, open the front door of the vehicle and b…
Removing Speakers on Volkswagen Golf MK4
Removing Speakers on Volkswagen Golf MK4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today we will see the instructions that will allow us to remove and replace the speakers on a fourth-generation Volkswagen Golf. First, open the fron…
Guide to Replacing the Rear Speakers on a Volkswagen Golf
Guide to Replacing the Rear Speakers on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, in this brief and simple guide, we will cover the steps to remove and replace the rear speakers on a Volkswagen Golf. First, get inside the ve…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos