|
Do it yourself
| |||
| ||||
How to replace the speaker of the VW Golf 6
Model: Volkswagen Golf
Golf 6, MK 6, 5K1, Golf VI
- Years:
2008, 2009, 2010, 2011, 2012
This video is currently unavailable
Today we will explain how to replace the speaker of the Volkswagen Golf MK6 model independently. Before proceeding with the speaker replacement, we need to remove the door panel using a plastic tool for leverage. We release the central part of the handle and after removing it, we use a 20mm key to unscrew the screws. We unscrew the side and bottom screws of the panel and then proceed with its removal. We disconnect the power connector of the window motor and completely release the panel. We remove the side part of the panel by releasing the plastic clips. We unscrew the screws on the speaker and after disconnecting the connector, we remove it. We insert the new speaker into the housing and mount the triangular part. We mount the door panel by performing the reverse procedure and test the speaker's operation by turning on the radio.
Posted on 1 April 2025 by ScegliAuto
Related tutorials
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
Today we will see the instructions that will allow us to remove and replace the speakers on a fourth-generation Volkswagen Golf. First, open the fron…
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
Today, in this brief and simple guide, we will cover the steps to remove and replace the rear speakers on a Volkswagen Golf. First, get inside the ve…
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
These simple steps will show you how to remove and replace the front speakers on the Volkswagen Golf. First, open the front door of the vehicle and b…
Other guides you may be interested in
|
How to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
