Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front shock absorber of the Volkswagen Amarok?

Model: Volkswagen Amarok MK 1 - Years 2010-2021
Part: Shocks

In order to replace the front shock absorber of the Volkswagen Amarok, you need to lift the car so that it is possible to loosen the corresponding front wheel, removing it completely from its hub: once this has been removed, it will be possible to locate the shock absorber located between the suspension and the upper strut. By unscrewing the screw at the bottom, it will then be possible to open the hood and loosen the screw at the top: in this way, the old shock absorber can be removed so that the new one can be inserted.

Posted on 14 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Shock Absorber on a Volkswagen Amarok
Removing the Shock Absorber on a Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) Do you want to replace the front shock absorber on a Volkswagen Amarok? Here’s how to remove it. Raise the vehicle on a column lift and remove the fr…
How to disassemble the front headlight of the Volkswagen Amarok
How to disassemble the front headlight of the Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) The following steps will allow us to disassemble and replace the front headlight of the Volkswagen Amarok. First, we open the hood of the car and sta…
Disassembly of the front door panel of the Volkswagen Amarok
Disassembly of the front door panel of the Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) The instructions in this guide will show us how to disassemble the front door panel of the Volkswagen Amarok. First, we open the front door and start…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos