Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Volkswagen Amarok

Model: Volkswagen Amarok MK 1 - Years 2010-2021
Part: Headlight

In this new guide dedicated to all of you who own a Volkswagen Amarok, we will explain the steps you need to take to disassemble one of the two front headlights of the vehicle on your own. First of all, turn off the car and then go outside and lift the front hood. Once you have done that, unscrew all the screws holding the headlight you want to remove and slightly loosen the front bumper in the wheel arch area. Finally, all you have to do is pull the headlight towards you and disconnect the electrical cable present to complete the procedure.

Posted on 13 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front headlight of the Volkswagen Amarok
How to disassemble the front headlight of the Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) The following steps will allow us to disassemble and replace the front headlight of the Volkswagen Amarok. First, we open the hood of the car and sta…
How to change the headlight bulb on a Volkswagen Amarok
How to change the headlight bulb on a Volkswagen Amarok
Volkswagen Amarok (2022-2026 / MK 2) To replace the headlight bulb on a Volkswagen Amarok, turn off the engine, open the bonnet, and access the rear of the affected headlight unit. After…
How to Remove the Tail Lights on the Volkswagen Amarok?
How to Remove the Tail Lights on the Volkswagen Amarok?
Volkswagen Amarok (2010-2021 / MK 1) Removing the tail lights on the Volkswagen Amarok is a straightforward task, as shown in the attached video tutorial. Start by opening the tailgate, …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos