Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the headlight bulb on a Volkswagen Amarok

Model: Volkswagen Amarok MK 2 - Years 2022-2026
Part: Headlight bulb

To replace the headlight bulb on a Volkswagen Amarok, turn off the engine, open the bonnet, and access the rear of the affected headlight unit. After removing the protective cover of the headlight, disconnect the electrical connector of the bulb and unclip the fastening system, which consists of a metal spring or a rotating bulb holder, depending on the vehicle version. Then, remove the worn bulb and install the new one of the same type, avoiding touching the glass bulb with your fingers. Next, reposition the locking system, reconnect the electrical connector, and close the headlight cover. Finally, turn on the lights to check the correct operation of the new bulb.

Posted on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front headlight of the Volkswagen Amarok
How to disassemble the front headlight of the Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) The following steps will allow us to disassemble and replace the front headlight of the Volkswagen Amarok. First, we open the hood of the car and sta…
How to change the taillight bulb of a Volkswagen Amarok
How to change the taillight bulb of a Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) In this video we see how to change the rear headlight bulb of a Volkswagen Amarok: we need to lower the rear side of the pick-up truck, in order to d…
How to disassemble the front headlight of the Volkswagen Amarok
How to disassemble the front headlight of the Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) In this new guide dedicated to all of you who own a Volkswagen Amarok, we will explain the steps you need to take to disassemble one of the two front…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos