Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Wheel Bearing on a VW Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Bearing

If you hear a noise similar to a buzzing coming from the rear of the vehicle, which increases in corners as the load on the wheel increases, the rear wheel hub bearing is likely damaged. The replacement is fairly straightforward as the bearing comes complete with the hub, which is the flange to which the brake disc is attached. Lift the vehicle and remove the rear wheel, the brake caliper with its support, and then remove the disc. Next, take off the cap at the centre of the hub to unscrew the central nut. Remove the flange with the old bearing and install the new one, securing it with a new nut and applying a new protective cap. Then, reverse the process by reassembling the disc, caliper, and wheel.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) This tutorial shows how to remove and replace the rear wheel bearing on a Volkswagen Polo. First, lift the vehicle and remove the rear wheel by unscr…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The work that we see being done in this video certainly does not happen frequently, especially for do-it-yourselfers, since there must be very specif…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Lift the vehicle on a hydraulic lift and remove the front wheels; Unscrew the caliper mounting bolts and remove it; then unscrew the brake disc mount…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos