Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Replacement of wheel bearings, disassembly of brake discs

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK IV, Polo IV, 9N, MK 4 - Years 2001-2009
Part: Bearing
Operation: Replacement of wheel bearings, disassembly of brake discs

Raise the car on a lift and remove the front wheels; Unscrew the fixing pins of the brake caliper and remove it; therefore unscrew the fixing pin of the brake disc to remove it from the hub; then remove the wheel speed sensor and the axle shaft fixing nut; unscrew the head and extract it with the special extractor; therefore remove the drive shaft from the hub and use the special extractor to disassemble the latter: it will come off complete with bearing. Clean the hub support from any rust residues and insert the new hub complete with bearing always with the appropriate tool (if you do not have this tool, disassemble the entire support and replace it with the aid of a press) . Then proceed backwards to reassemble the other elements.


Posted on 8 July 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos