Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Discs on a Polo 9N

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake rotors

See other generations:
Video tutorial

Want to replace the rear brake disc on your Polo? Here’s how to remove the disc from the rear of the car. Lift the vehicle with a jack and remove the wheel. Unscrew the bolts of the brake caliper to detach it from the bracket.

Remove the brake pads and unscrew the bolts on the brake disc (using a Torx screwdriver), then pull the disc towards you to slide it off the hub. Fit the new brake disc with all the associated bolts, tighten the caliper bracket to the disc and the pads, then refit the brake caliper.

Replace the other rear disc if it is damaged.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Seats of the Volkswagen Polo
Removing the Rear Seats of the Volkswagen Polo
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) Today's guide illustrates the procedure to remove the rear seats of the Volkswagen Polo, following these simple steps. First, open the doors and star…
How to Fold Down the Rear Seats on a Polo
How to Fold Down the Rear Seats on a Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) How to fold down the rear seats of the Volkswagen Polo? Let's see how to do it inside the vehicle. Open the door and lift the seat base of the rear s…
How to Replace the Rear Light Bulbs on the Volkswagen Polo?
How to Replace the Rear Light Bulbs on the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this tutorial, you will see how to replace the rear light bulbs on the Volkswagen Polo, a very simple and quick operation. First, ensure the key i…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos