Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the bulb holder of the rear headlight of the 2009 Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

If you want to disassemble the bulb holder of the rear headlight of your Volkswagen Passat (2009) correctly and safely, all you need to do is carefully read the following procedure and apply all the steps described. First of all, remember to turn off the car so that you can work safely, then lift the rear hood completely and remove the protective cover located on the side of the trunk.

At this point, locate the bulb holder and pull it towards you. Once removed, you can proceed with the replacement of any faulty bulbs.


Posted on 22 April 2025 by ScegliAuto


Related tutorials

Replace Front Headlight Bulbs on VW Passat
Replace Front Headlight Bulbs on VW Passat
Volkswagen Passat (2005-2010 / B6, 3C) Are the front headlight bulbs damaged? Here’s how to replace them on a Volkswagen Passat. Open the front bonnet by pulling the lever located at the b…
How to Change the Headlight Bulbs on a Passat
How to Change the Headlight Bulbs on a Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Learn how to replace the damaged bulbs in the front headlight of a Volkswagen Passat: open the bonnet by pulling the lever located at the bottom righ…
How to Remove the Headlight Bulbs of a Volkswagen Passat
How to Remove the Headlight Bulbs of a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Follow these steps to remove the headlight bulbs of a Volkswagen Passat. Open the bonnet by pulling the lever located at the bottom right of the dash…

How to Reset the Tyre Pressure Light on a Cupra Formentor

In this brief and simple video tutorial, learn how to reset the tyre pressure on a Cupra Formentor. Start by pressing the ignition button to turn on the instrument cluster. Now, use the touchscreen display on the central console to open the car menu. From here, select the driving data option, then the tyre pressure option. Now, click on the "SET" button with the pressure warning symbol and confirm the correct tyre pressure required by the manufacturer to perform the reset.

Watch the video!


by ScegliAuto

More videos