Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headrest of the Volkswagen Passat

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

See other generations:
Video tutorial

Today we will see the instructions that will allow us to disassemble and eventually replace the front headrest of the Volkswagen Passat. First of all, we get on board the car and start by raising the front headrest completely, pressing on the clips located on the base of the headrest; then we proceed to unhook the clip that we find under the supports, pulling the headrest upwards to remove it permanently, as shown in the video.

At this point, we carry out the repair or replacement, reassembling it correctly and finally adjusting the height.


Posted on 3 May 2025 by ScegliAuto


Related tutorials

How to Remove the Front Headrest from a Volkswagen Passat
How to Remove the Front Headrest from a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) How to remove the front headrest from a Volkswagen Passat? This video explains the procedure: open the door and enter the front or rear (depending on…
How to remove the headrest from a Volkswagen Passat?
How to remove the headrest from a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To remove the headrest from a Volkswagen Passat, you need to detach the plastic cover at the base of the rod supporting the headrest: once this cover…
How to Remove the Front Seat from a Volkswagen Passat
How to Remove the Front Seat from a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) How to remove the front seat from a Volkswagen Passat? This video explains how to proceed. First, move the seat forward (using the electric buttons i…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos