|
Do it yourself
| |||
| ||||
How to replace the storage compartment of the Volkswagen Golf MK5
Model: Volkswagen Golf
MK 5, Golf 5, Golf V
- Years 2003-2008
In this video we see how to change the glove box of the Volkswagen Golf MK5: the first thing to do is to disconnect the battery, because we will have to disconnect the airbag switch, and the air hose; then we will remove six screws, three inside the glove box and three below it. We will then remove the side panel of the dashboard thickness, and the finish of the lining. A seventh screw is located laterally, between the ashtray and the heating dial. The glove boxes of this car are easily found online, with prices ranging from 55 to 70 euros. In order to not have to change the key, the youtuber prefers to keep the door of the glove box, so we can follow his method to remove it from the guides and recover it and then reassemble it on the replacement one. All that's left is to put it back in place, reconnecting the airbag switch and the air hose, then put back all seven screws that we had previously disconnected.
Posted on 9 May 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
In this video, replace the pollen filter on the Volkswagen Golf mk5. Start by opening the passenger door and removing the screws from the plastic pan…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
The steps shown in this guide will demonstrate how to remove and replace the glove compartment bulb in a Volkswagen Golf. First, get inside the vehic…
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
In this tutorial, see how to remove the glove compartment drawer in a Volkswagen Golf 5. Start by unscrewing the three screws located on the lower ed…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.190
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |