Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the Front Assist sensor of the Volkswagen Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

To replace the Front Assist sensor of the Volkswagen Golf, you need to use an object to pry off the manufacturer's badge located on the front of the vehicle. Once the badge is removed, you can proceed by loosening the screws that secure the sensor in place. Then, you will need to disconnect the connectors attached to the sensor in order to completely remove it from its housing. Now, you can insert the new replacement part by connecting and fixing it to ensure that everything works properly.

Posted on 28 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In order to reset the Front Assist of the Volkswagen Golf, it will be necessary to completely remove the front bumper and the corresponding grille: t…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The Front Assist system installed in Volkswagen vehicles, such as the Volkswagen Golf 8, consists of an electronic sensor installed inside the front …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To calibrate the Front Assist of the Volkswagen Golf, use a special tool called ADAS. First, locate the radar by removing the front badge, prying it …

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos