Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Front Assist of the Volkswagen Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

In order to reset the Front Assist of the Volkswagen Golf, it will be necessary to completely remove the front bumper and the corresponding grille: this is because behind the manufacturer's emblem there is the sensor that allows the Front Assist to function. Once this has been located, it will be possible to loosen the screws that attach it to the corresponding support bracket: now it will be necessary to remove it and insert the new one, or clean the contacts of the old one. After the new installation, it will be possible to verify that the Front Assist is reset and functioning again.

Posted on 31 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The Front Assist system installed in Volkswagen vehicles, such as the Volkswagen Golf 8, consists of an electronic sensor installed inside the front …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To calibrate the Front Assist of the Volkswagen Golf, use a special tool called ADAS. First, locate the radar by removing the front badge, prying it …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To replace the Front Assist sensor of the Volkswagen Golf, you need to use an object to pry off the manufacturer's badge located on the front of the …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos