Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Volkswagen Touareg

Model: Volkswagen Touareg MK 2, 7P - Years 2010-2018
Part: Door trim panel

Today we will see the main information on how to disassemble and replace the front door panel of the Volkswagen Touareg. First of all, we open the front door of the car and start by removing the plastic cover located at the top; then we unscrew all the fixing screws found on the door panel, disconnecting the electrical connector of the window switch panel and the handle cable to remove it, as shown in the video. At this point, it will be possible to access the internal components of the door, fixing it again and reassembling the window switch panel.

Posted on 18 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Volkswagen Touareg
How to Remove the Door Panel of a Volkswagen Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) Before starting, open the door of your Volkswagen Touareg. Begin by prising out and removing the insert of the door handle panel using a thin but stu…
Removing the Door Panel of the Volkswagen Touareg
Removing the Door Panel of the Volkswagen Touareg
Volkswagen Touareg (2018-2026 / MK 3, CR) In today's video, you will see the steps that will allow you to remove and replace the door panel, both front and rear, of the Volkswagen Touareg. Fi…
Removing the Door Panel on the Volkswagen Touareg MK2
Volkswagen Touareg (2010-2018 / MK 2, 7P) In this video, we will see the main instructions for removing the front door panel on the second series Volkswagen Touareg. First, open the front doo…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos